HDMI on BRAVIA

[goma_23]

Guys,

I installed NVDIA video card with HDMI capability, then i connected it to a 60 inch bravia projector tv , ok siya , problema ko lang lagpas yung screen,

papaano ko ba siya mai-eksakto?

Previously kase , maliit siya kaya nagpalit ako video card ,pero sumobra naman siya, hehehe hope meron nang ganitong case,

[g33k]

yun ba yung tipong nag-sscroll yung screen :hihi:

try setting the resolution to a lower one :)

[goma_23]

yun ba yung tipong nag-sscroll yung screen :hihi:

try setting the resolution to a lower one :)

di naman siya nagscroll , pero may mga ginawa kase akong program na full screen , na pagdating sa bravia hindi kita yung upper left portion ng program , which means meron pang naiwan na hindi pinapakita sa screen.

I previously tried to modify the resolution , pero ganon pa rin,

[g33k]

pagdating sa bravia hindi kita yung upper left portion ng program
upper left portion lang ba ang nawawala? how about yung part ng buong left-most portion ng program/window?

base sa sinabi mong upper left portion ng program, ito ba yung area na nawawala:

16776

[palaboy]

Hindi kaya tol dapat sa bravia ka mag set ng resolution?

Kaya bang mag pukol ng 1080p reso ng video card mo?:)

[dcat]

Guys,
I installed NVDIA video card with HDMI capability, then i connected it to a 60 inch bravia projector tv , ok siya , problema ko lang lagpas yung screen,
hullo goma!
i guess bravia must include a driver in which an inf file is included. open that inf file and you would see what is proper resolution settings for your bravia monitor.if it does not include a specialized driver, then your computer will be forced to used an ordinary driver, that is, a generic plug and play monitor driver, which can not control your bravia effectively.

assuming you have the specialized bravia driver, and you know the proper resolution by browsing through the inf file, you then must see if your nvidia graphic card could support that resolution settings. if it does, then you could set your driver monitor at the Device Manager pane. good luck!:)

[goma_23]

hullo goma!
i guess bravia must include a driver in which an inf file is included. open that inf file and you would see what is proper resolution settings for your bravia monitor.if it does not include a specialized driver, then your computer will be forced to used an ordinary driver, that is, a generic plug and play monitor driver, which can not control your bravia effectively.

assuming you have the specialized bravia driver, and you know the proper resolution by browsing through the inf file, you then must see if your nvidia graphic card could support that resolution settings. if it does, then you could set your driver monitor at the Device Manager pane. good luck!:)

drivers were all properly installed, bale lumalabas hindi kayang ilabas nung signal yung picture sa loob ng area ng bravia, I've been searching sa ibang sites pero puro japanese eh ,

I also tried yung settings ng bravia , pero 3 types lang ang puwede niyang i set,

[goma_23]

Hindi kaya tol dapat sa bravia ka mag set ng resolution?

Kaya bang mag pukol ng 1080p reso ng video card mo?:)

kaya pa more than that, pero yung picture ang problema ko , putol all sides

[goma_23]

upper left portion lang ba ang nawawala? how about yung part ng buong left-most portion ng program/window?

base sa sinabi mong upper left portion ng program, ito ba yung area na nawawala:



lahat ng side pre,

Anyway i'm browsing on the details of the video card, medyo cornered na ako sa documentation ng bravia,

[palaboy]

kaya pa more than that, pero yung picture ang problema ko , putol all sides

Ganon ba? I have no Bravia kasi e! Well I think you know naman siguro ang isang site sa atin. tipid pc, please Pm mo si WOODY, he is my friend and expert sya sa mga ganyan,baka matulungan ka. pag nag tanong kung sinong may sabi, sabihin mo nobody lang dont mention my name kasi he will not recognize my name palaboy!

[goma_23]

Ganon ba? I have no Bravia kasi e! Well I think you know naman siguro ang isang site sa atin. tipid pc, please Pm mo si WOODY, he is my friend and expert sya sa mga ganyan,baka matulungan ka. pag nag tanong kung sinong may sabi, sabihin mo nobody lang dont mention my name kasi he will not recognize my name palaboy!

tnx dude ,try ko rin , tumatambay din ako doon paminsan minsan, heheheh.