HP Photosmart 8753 question

[katek]

hey guys, i just bought this HP Photosmart 8753 printer last saturday (june 21). i don't get any response from the printer after installing it. hindi nag iilaw yung printer. ayaw mag on. so my dad called tech support and we were informed that they will replace it. so eto na, dumating na yung bago. pero ganon pa din...baket kaya?? wah!

125v nakalagay sa cord nya. and malamang dito gagana yun diba kasi dito binili....

the first printer, may tumutunog kapag sinaksak. pero hindi sya nag sswitch on. ngayon tong replacement, walang tunog. hindi rin nag oon. :(

iniisip ko baka limited lang ang kaya na kuryente dito sa apartment ko? kasi pag minsan, naka aircon ako, tapos saksak ref, tv, computer...tapos nag microwave ako, nag bbrown out. :D:p so inoon ko na lang ulit yung...anong tawag don. switch. circuit breaker ba? basta yon.

[shuji]

hey guys, i just bought this HP Photosmart 8753 printer last saturday (june 21). i don't get any response from the printer after installing it. hindi nag iilaw yung printer. ayaw mag on. so my dad called tech support and we were informed that they will replace it. so eto na, dumating na yung bago. pero ganon pa din...baket kaya?? wah!

125v nakalagay sa cord nya. and malamang dito gagana yun diba kasi dito binili....

the first printer, may tumutunog kapag sinaksak. pero hindi sya nag sswitch on. ngayon tong replacement, walang tunog. hindi rin nag oon. :(

iniisip ko baka limited lang ang kaya na kuryente dito sa apartment ko? kasi pag minsan, naka aircon ako, tapos saksak ref, tv, computer...tapos nag microwave ako, nag bbrown out. :D:p so inoon ko na lang ulit yung...anong tawag don. switch. circuit breaker ba? basta yon.

Make sure the outlet is supplying power to your printer. Saksak ka ng ibang electric appliance like radio or something just to make sure may kuryente. Kung wala, try resetting the circuit breaker. Hope that helps.

[katek]

Make sure the outlet is supplying power to your printer. Saksak ka ng ibang electric appliance like radio or something just to make sure may kuryente. Kung wala, try resetting the circuit breaker. Hope that helps.

nakasaksak na po lahat ng kelangang maisaksak..
naka plug naman po ang ricecooker, laptop and ref...so...hay.

sige po. ttry ko...pero as much as possible ayokong makialam sa circuit breaker...haha baka mamaya e mapasabog ko or something :p antayin ko na lang tatay ko gumawa nyan :p

[shuji]

nakasaksak na po lahat ng kelangang maisaksak..
naka plug naman po ang ricecooker, laptop and ref...so...hay.

sige po. ttry ko...pero as much as possible ayokong makialam sa circuit breaker...haha baka mamaya e mapasabog ko or something :p antayin ko na lang tatay ko gumawa nyan :p

Katek, sinubukan mo na bang i-plug sa ibang outlet your printer mo? Of course, you have to press the power button afterwards to turn it on. Check the Quick Start Guide that came with your printer, you might be missing something.

[katek]

Katek, sinubukan mo na bang i-plug sa ibang outlet your printer mo? Of course, you have to press the power button afterwards to turn it on. Check the Quick Start Guide that came with your printer, you might be missing something.
i did. ganon pa din eh... :(

[sarpon]

check mo yung labas at loob ng printer.. look for tapes and/or styro. check mo din baka maluwag yung plug.

[katek]

check mo yung labas at loob ng printer.. look for tapes and/or styro. check mo din baka maluwag yung plug.
ok naman eh.... haay.

[sarpon]

ok naman eh.... haay.

check mo yung cable na nakakakabit from the wall outlet dun sa power adaptor. Usually pag di mahigpit na mahigpit yun ay di gagana. check mo rin sa HP site na manuals:

http://h10025.www1.hp.com/ewfrf/wc/manualCategory?man_l ang=en&lc=en&cc=ru&product=440148&dlc=ru